Know what your piece is made from
Air-drying modelling clay and kiln-fired ceramic are made and finished differently, so they do not automatically share the same care instructions. Paint and surface coatings add another layer to consider.
ONER uses air-dry clay, shaped and painted by hand. The surface finish still matters when choosing how to clean or display a piece. Crayola, for example, says its dried and sealed Air-Dry Clay remains non-waterproof and recommends indoor display. That manufacturer guidance illustrates why sealing alone is not proof of waterproofing.
Keep cleaning gentle
For a decorative piece with an unconfirmed finish, start with a clean, soft, dry cloth or a soft brush. Support the whole object while removing loose dust, rather than holding it by a raised flower, a narrow rim or a small attached detail.
Ask before using a damp cloth, cleaning product, polish or abrasive sponge. Do not soak it or put it in a dishwasher unless the maker has specifically confirmed that treatment. If a mark will not lift with gentle dry cleaning, send a photo to the maker before trying a stronger method.
Choose a considered place in your Dubai home
An indoor shelf or stable desk gives you control over where the piece sits. Keep an unverified decorative object away from splashes, open flames and surfaces that become hot. A display beside a sink, on a balcony or in a sun-exposed car needs a separate suitability check.
Lift a dish from underneath and keep delicate pieces apart so painted edges do not rub together. For wall art, confirm the hanging method and weight before fitting hardware. For a mirror or stand, check that the support is stable in its intended position.
Store carefully and ask before repairing
Wrap pieces individually for storage or a move, paying attention to rims and raised details. Avoid stacking weight on them. Keep the piece’s name and the maker’s care instructions with it so you do not have to guess later.
If you notice a chip, loose attachment or a change in the finish, stop using that part and send a clear photo to the maker. A repair material can change the appearance and intended use. For an ONER piece, message @onerclay with its name and a photo for guidance.
Sources & further reading
Manufacturer guidance applies to the named material. Ask us about the clay and finish of your ONER piece.



